6th Gen ZL1 Magnuson TVS2650R | Stage 2 (Race)

The Street build with the restrictions taken out of it. Kong-ported 2650, 112mm throttle body and inlet, DSX Atlas port injection, a trunk mounted heat exchanger system, and a flex fuel calibration that runs anything from 93 octane through E85. Built for cars that see real track time and still drive home.

Fitment: 2017 to 2024 Camaro ZL1 (LT4), wet sump only.

Fuel: Flex fuel calibrated. 93 octane through E85.

Required with this package

The drivetrain has to hold what the engine is making. One of these applies to every car:

• M6 (manual): clutch upgrade. We use the Monster S Series Triple Disc Clutch, rated to 1,150 rwhp with stock pedal effort and factory engagement feel.
• A10 (automatic): TCM calibration +$650

This is not optional. The factory clutch will not hold this power, and the factory transmission calibration will not shift it.

What's included

Supercharger
Magnuson TVS2650R Magnum DI Supercharger System (wet sump)
Magnuson 112mm Inlet
Kong Performance CNC Porting of Supercharger and Snout
Vengeance Racing 2650 Install Kit for 6th Gen Camaro (AN lines and fittings for HX plumbing)

Induction & Airflow
RotoFab Big Gulp Cold Air Intake
Nick Williams 112mm Gen V LT Throttle Body (Black)

Cylinder Heads
Vengeance Racing CNC Ported LT4 Cylinder Heads, built by LME (core exchange)
CNC ported intake, exhaust, and chambers
GM 2.125" Titanium Intake Valves
REV 1.600" Severe Duty One-Piece Stainless Exhaust Valves
CHE Precision Manganese Bronze Valve Guides
Polished Dual Valve Spring Kit set up for .660" lift
Valve guide clearance measured and adjusted per application

VR Cam Kit
Vengeance Racing Custom Camshaft (38% fuel lobe upgrade)
Brian Tooley Racing .660" Lift Dual Valve Spring Kit with Titanium Retainers
Vengeance Racing 3/8" Hardened Pushrods
IWIS Pro Series Seamless Roller Timing Chain
CHE High Performance Trunnion Kit
LME Billet VVT Delete Front Cover with Billet Dog Bone Guide
Johnson 2110R Drop-In Hydraulic Lifters
GM Lifter Trays
GM Crank Bolt
GM MLS 6.2L Head Gaskets
GM LT Exhaust Gaskets
DOD Delete Plug Kit
ARP Cylinder Head Bolt Kit
GM LS Front Cover Seal

Valve Covers
Vengeance Racing CNC Billet Valve Covers (Gen V LT wet sump, stainless hardware with O-ring washers, coil relocation plug wires included)

Oil System
Katech Gen V LT Wet Sump Oil Pump (billet gear)

Pulleys & Drive
ATI Wet Sump Balancer Kit
DSX Tuning 9.45" LSA/LT4 Lower Pulley (bolts included)
Gates Green HD 8-Rib Supercharger Belt

Exhaust
Kooks 2" Stainless Long Tube Headers with 3" X-Pipe and GREEN Catalytic Converters
Vengeance Racing Header Bolt Kit
Pricing is based on GESI / Kooks H.O. GREEN cats. Other options available.

Cooling: Trunk Mounted Heat Exchanger System
Cordes Performance Racing Trunk Tank for 6th Gen Camaro (external EMP pump, satin black finish, drain valve included)
Vengeance Racing 42mm Track Edition Heat Exchanger Upgrade for 6th Gen Camaro ZL1
AMP Billet Thermostat Housing (160°)
AN lines and fittings for plumbing

Port Injection
DSX Tuning Atlas Port Injection Controller with dual bank wideband
DSX LTX Port Injection Plates (ultra low)
Injector Dynamics 1050cc Fuel Injectors
AN lines and fittings for port injection plumbing

Fuel System
DSX Tuning 6th Gen Dual Bucketed Fuel Pump (TI Automotive 295 to 535 LPH, new fuel level sender)
Vengeance Racing Flex Fuel Kit

Crankcase
Mighty Mouse Wild Catch Can System (AN lines and fittings included)

Ignition
NGK LTR7IX Iridium Spark Plug Set

What the Full Package covers

The Full Package is not parts plus labor. It is a complete, calibrated, running car handed back to you. On top of every part listed above, the installed price includes:

• Professional installation of all listed hardware
• Supercharger and snout sent out for CNC porting and returned
• Cylinder head core exchange handled end to end
• All required fluids (engine oil, filter, coolant) and used-fluid recycling
• Complete ECU calibration, calibrated with HP Tuners and VR RTD
• Port injection calibration
• Advanced flex fuel calibration
• Baseline and final dyno testing, with a before and after printout
• All HP Tuners licensing and ECU credits
• Full street and dyno tuning session
• 10 gallons of 93 octane fuel and 20 gallons of Ignite Orange E85
• Complete four-wheel alignment
• Shop supplies and interior and exterior protection throughout the build
• Vengeance Racing limited warranty
• Wash and vacuum before delivery

Parts Only ships you the hardware. The Full Package is that same hardware installed, tuned, and running before it leaves the shop.

Parts Only (shipped)

Parts Only ships the complete hardware kit to your door. Two items on this package are send-in: the supercharger and snout ship to our machining partner for CNC porting, and the cylinder heads are a core exchange with our head partner. Freight both directions on both is already included in the price. Installation, tuning, fluids, and calibration are not included. Shipping on your hardware kit is calculated at checkout.

Available add-ons

• DSX Billet Supercharger Lid (contact for pricing)
• Chassis and suspension upgrades, ride height adjustment (contact for pricing)
• Short throw shifter (contact for pricing)
• VR cooling package, wheel and tire packages, road-force balancing, PPF, ceramic coating, window tinting, custom powder coating

A deposit holds your build slot

$500 deposit at checkout. Balance due at drop-off. Questions before booking? Contact us.